РАЦІОНАЛІЗАЦІЯ ГЕОМЕТРИЧНИХ ПАРАМЕТРІВ ЕФЕКТИВНИХ ФУНДАМЕНТНИХ БЛОКІВ

Автор(и)

  • Ю.М. Круль Харківський національний університет міського господарства імені О.М. Бекетова https://orcid.org/0000-0002-0069-4191
  • П.М. Фірсов Харківський національний університет міського господарства імені О.М. Бекетова https://orcid.org/0000-0001-9119-3968
  • С.А. Потапов Харківський національний університет міського господарства імені О.М. Бекетова https://orcid.org/0009-0005-2845-4930

DOI:

https://doi.org/10.33042/2311-7257.2024.111.1.12

Ключові слова:

раціоналізація, моделювання, енергія деформації, бетон, фундаментний блок

Анотація

Наукова робота присвячена раціоналізації геометричних параметрів ефективних фундаментних блоків за допомогою використання біоніко-енергетичного методу побудови оптимізованих конструкцій. Виконано чисельне моделювання шляхом побудови деталізованих скінчено-елементних моделей варіантів блоків та на його основі вибрана найбільш раціональна геометрія блоку з точки зору мінімізації потенційної енергії деформації. Проведено аналіз напружено-деформованого стану вибраного варіанту.

Біографії авторів

Ю.М. Круль, Харківський національний університет міського господарства імені О.М. Бекетова

кандидат технічних наук, старший викладач кафедри будівельних конструкцій

П.М. Фірсов, Харківський національний університет міського господарства імені О.М. Бекетова

кандидат технічних наук, доцент, в.о. завідувача кафедри будівельних конструкцій

С.А. Потапов, Харківський національний університет міського господарства імені О.М. Бекетова

аспірант кафедри будівельних конструкцій

Посилання

Asadi, I., Shafigh, P., Hassan, Z., & Mahyuddin, N. (2018). Thermal conductivity of concrete – a review. Journal of Building Engineering, 20. 81-93. https://doi.org/10.1016/j.jobe.2018.07.002

Noh, H., Kang, H., Kim, M., & Park, H. (2018). Estimation Model for Effective Thermal Conductivity of Reinforced Concrete Containing Multiple Round Rebars. International Journal of Concrete Structures and Materials, 12, 65. https://doi.org/10.1186/s40069-018-0291-2

Misri, Z., Ibrahim, M., Awal, A., Dese, M., & Ghadzali, N. (2018). Review on factors influencing thermal conductivity of concrete incorporating various type of waste materials. Proceedings of IConCEES-2017, 140, 012141, IOP Publishing. https://doi.org/10.1088/1755-1315/140/1/012141

Shmukler, V.S., Lugchenko, O.I., & Nazhem, A. (2020). Topological optimization of the plate. Bases and Foundations: Scientific Bulletin, 40, 112-119. https://doi.org/10.1088/1755-1315/140/1/012141 [in Ukrainian]

Shmukler, V.S., Vozniuk, L.I., & Berezhna, K.V. (2022). Energy portrait of the structural system as a criteria for option design. Scientific Bulletin of Kharkiv National Automobile and Highway University, 98. 136–143. DOI: 10.30977/BUL.2219-5548.2022.98.0.136 [in Ukrainian]

Shmukler, V.S. (2022). About one approach to the formation of design technology of rational designs. Scientific Bulletin of Kharkiv National Automobile and Highway University, 98. 93–113. https://doi.org/10.30977/BUL.2219-5548.2022.98.0.136 [in Ukrainian]

Shmukler, V.S., Reznik, P.A., Petrova, O.O., Nikulin, V.B., Misiura, M.V., & Bohomaz, M.Yu. (2019). Assessment of the influence of the divide in the concrete slab of the MONOFANT system on its stress-strain state. Collection of Scientific Works of the Ukrainian State University of Railway Transport, 185. 61–70. https://doi.org/10.30977/BUL.2219-5548.2022.98.0.136 [in Ukrainian]

Andersen, M., Poulsen, P., Olesen, J., & Hoang, L. (2023). Strength-based material layout optimization of solid reinforced concrete. Computers and Structures, 276, 106941. https://doi.org/10.1016/j.compstruc.2022.106941

Hou, C., Zhen, W., & Wu, X. (2020). Structural state of stress analysis of confined concrete based on the normalized generalized strain energy density. Journal of Building Engineering, 31, 101321. https://doi.org/10.1016/j.jobe.2020.101321

Zhang, L., Gong, S., & Ma, X. (2011). A Model to Predict Fatigue Life of Concrete Based on Total Strain Energy Density. Applied Mechanics and Materials, 99-100, 1018–1022. https://doi.org/10.4028/www.scientific.net/AMM.99-100.1018

Del Coz-Diaz, J., Garcia Nieto, P., Dominguez Hernandez, J., & Suarez Sanchez, A. (2009). Thermal design optimization of lightweight concrete blocks for internal one-way spanning slabs floors by FEM. Energy and Buildings, 41(12), 1276–1287. https://doi.org/10.1016/j.enbuild.2009.08.005

Del Coz-Diaz, J., Garcia Nieto, P., Alvarez Rabanal, P., & Dominguez Hernandez, J. (2012). Non-linear analysis of the efficiency of light concrete multi-holed bricks with large recesses by FEM. Applied Mathematics and Computation, 218, 10040–10049. https://doi.org/10.1016/j.amc.2012.03.096

Morales, M., Juarez, M., Lopez-Ochoa, L., & Domenech, J. (2011). Study of the geometry of a voided clay brick using rectangular perforations to optimize its thermal properties. Applied Thermal Engineering, 31, 2063–2065. https://doi.org/10.1016/j.applthermaleng.2011.02.033

Zhang, Y., & Wang, W. (2017). Influence of Hollow Block’s Structural Configuration on the Thermal Characteristics of Hollow Block Wall. Procedia Engineering, 205, 2341–2348. https://doi.org/10.1016/j.proeng.2017.10.306 15. Ye, B., & Zhou, H. (2019). Thermal Performance Analysis of Concrete Small Hollow Block. Proceedings of the 9th International SOLARIS conference: Vol. 556, 012041, IOP Publishing. https://doi.org/10.1088/1757-899X/556/1/012041

##submission.downloads##

Опубліковано

2024-12-10